S60 mobile phone data cable with phone contact with unstable solutions [text]

I believe many used NOKIA camera, are met, for mobile phone data cable connection to computer a disconnect action, this is a common failing of NOKIA hands. Due to the design-time using the rhubarb tooth interface (pop-port), small series as well as the pain for a long time, and also changed the data cable, you can change it or will this little series like this should not be mobile phone, because if you question why use cell phone headset does? on after comparing a find, finally found the secret of this. Here to explain:

First of all, we look at the data cable is connected mobile end (Figure 1)

Second, take a look at the headset and the phone connection end (Figure 2)

From the above two figure, we can see that the data cable is connected the mobile phone side of metal with only a data cable and phone contacts are about half of the headset and the phone connector at both ends have the metal, and the mobile phone side connected most of the contacts, the contact more firmly. Issue of nexus found, it is because the data line contact imbalances resulting in poor contact.

Well, crap do not say! said the next solution.

Workaround: use scissors to cut width fit, a mm thick paper glue to the data cable is connected the mobile phone side empty place. The other half to complement, (Figure 3), balance, and then connect to the phone to see if it is OK!